Fibrinogen
Orderable EAP code:
LAB00240Billable EAP Codes:
CPT Codes:
Lab Section:
Core LabTurnaround Time:
Routine and Urgent: 60 Minutes
Test Schedule:
24 hours, 7 days a week.
Units:
mg/dLCritical Values:
Less than or equal to 50 mg/dL.
Specimen Requirements:
3.2% sodium citrate tubes are acceptable provided they are filled to the line on the manufacturers label. Tubes must be full (see comments below).
Stability:
Whole blood specimens are stable for up to (and including) 4 hours at room temperature.
Citrate plasma separated from cells is stable for up to (and including) 8 hours at room temp.
Citrate plasma separated from cells is stable for up to (and including) 14 days at -20 degrees C.
Pediatric Specimen Requirements:
Add blood to the 1.3 mL mark of Pediatric BLUE top tube, 3.2% sodium citrate. Pediatric tubes are acceptable provided they are filled to the line on the manufacturers label.
Reference Range:
Reference Range: 150 to 393 mg/dL
Comments:
Draw volume is critical due to the liquid anticoagulant. Allow tubes to fill by vacuum.
- Tubes with rubber stopper: fill to line on label.
- Tubes with plastic (Hemogard) cap: the fill level is above the top of the label.
- Syringe: do not remove the vacutainer stopper. Insert the needle through the stopper and allow the tube to fill by vacuum. Do not overfill the vacutainer.
- Pediatric tubes have no vacuum. Remove the cap and add blood to the 1.3 mL mark. Do not overfill.
Clotted specimens are unacceptable.
Synonyms:
Coags
Fibrinogen Level, Quantitative